How to Use This Reference
The commands and procedures described in this Reference are intended
for use with a program that provides a command line interface to the modem,
or if the modem is connected to an asynchronous terminal from which commands
can be entered and sent through the serial port to the modem. Although commands
are not required when using Hayes Smartcom (TM) products, Smartcom EZ (TM),
Smartcom Exec (TM), Smartcom II (TM), Smartcom for Windows and Smartcom
III all support a command line interface to the modem.
This Reference is not a list of the features supported by your modem, but
a general guide to the Hayes Standard AT Command Set as used to control
Hayes modems. For a specific list of features supported by your modem, refer
to the documentation included with your modem. This reference is supplementary
to the documentation provided with your modem, not a replacement.
Click here to return to the Contents page.