Qn - Select Result Code Option

Command Line Format
AT [cmds] Q [suffix] [cmds] <CR>

Suffix Values
0 through 2

Default
Q0

Stored by &Wn
yes

Displayed by &V
yes

Description
Qn instructs the modem whether to send result codes to the DTE.

Result Codes
Q0 - Result codes enabled.

Q1 - Result codes disabled.

Q2 - Disables all versions of the RING result code. In answer mode, all result codes that would occur during or after handshake and the NO CARRIER result code if because of loss of carrier or DTR going off. Result codes in the online command state are not affected.

Execution Time
1 ms maximum

Cross Reference
DTE signals - Receive Data (RD) - pin 3

LEDs - RD

Click here to return to the Contents page.