&V6 - View Blacklist

Command Line Format
AT [cmds] &V6 [cmds] <CR>

Default
N/A

Stored by &Wn
N/A

Displayed by &V
N/A

Description
This command is optional.

The &V6 command displays of the blacklist status. The display contains the following information fields:

Phone Num - Phone number in blacklist format.

Failed calls - Number of unsuccessful calls to this number. For countries which classify call failures as busy or erroneous, the output is in the form of Xb, ye where Xb represents X busy calls and ye represents y erroneous calls.

Time to redial - For algorithms which require some sort of wait time between calls, this value represents the time which must elapse before the number can be dialed.

Time to reset - For algorithms which reset some or all statistics for a phone number after some elapsed time, this value represents the time left until the reset occurs.

Status - OK indicates that the number can be dialed now.

- Blocked indicates that the number cannot be dialed now.

Sample output - The following is a sample screen output using the AT&V6 command, the phone numbers are shown in a chart format for clarity. The display ends with the OK result code.

AT&V6

Phone Number         Failed calls   Time to redial     Time to reset         Status      

0123456789012        1b,            1e 0 min 0 sec     57 min 16 sec         OK          

123456               0b,            2e 0 min           0 sec 0 min 0 sec     Blocked

OK

Click here to return to the Contents page.