%SUID - User Identification

%SUID - User Identification - Outgoing calls

Command Line Format
AT [cmds] %SUID=<num>[,<gp>] [;cmds] <CR>

Volatile
yes, cleared after each call

Default
0, 0

Write only
yes

Displayed by &V
no

Description
This command stores the user identification. The <num>field is a decimal number from the set (0 - 65535). The optional group &ltgp>field shall be entered as a decimal number from the sets (0,1-255); the value 0 indicates no <gp>number. Entered numbers in their respective ranges shall cause an OK result code; otherwise ERROR. The group field permits a two-level user ID scheme. If &ltgp>is omitted, the value is set to 0.

Click here to return to the Contents page.