%CRID Repeat Last ID
Type
Extended syntax parameter.
Command Line Format
AT [cmds] %CRID=[<value>] [;cmds] <CR>
Default
0
Stored by &Wn
na
Displayed by &V
na
Description
This command instructs the DCE to send all available call information
on the last displayed call to the DTE and allows the DTE to request the
information after a call has been answered. %CRID has one associated value,
to choose formatted or unformatted call information text. The value may
be 0 or 1. %CRID entered without a value is the same as entering the command
with value 0.
0 formatted
1 unformatted (modem only)
The DCE returns the OK result code after this command is executed; that
is, after the requested information text has been sent to the DTE. If no
information is available, the OK result code is sent to the DTE.
Click here to return to the Contents page.