Negotiation Progress Messages
Hayes products report special result codes during error-control negotiation.
Use the W command (not the W dial modifier) to display these messages. The
factory setting disables these messages (W0) to avoid conflict with software
programs that do not support this additional level of call progress monitoring.
Negotiation progress messages are reported in the following order:
CARRIER
PROTOCOL
AUTOSTREAM
COMPRESSION
CONNECT
If AutoStream is not used, no message is reported.
# Verbose Meaning
36 CARRIER 26400 Carrier signal detected at 26400 bits/s (modem-to-modem line speed).
37 CARRIER 24000 Carrier signal detected at 24000 bits/s (modem-to-modem line speed).
38 CARRIER 21600 Carrier signal detected at 21600 bits/s (modem-to-modem line speed).
39 CARRIER 48000 Carrier signal detected at 48000 bits/s (modem-to-modem line speed).
40 CARRIER 300 Carrier signal detected at 300 bits/s (modem-to-modem line speed).
41 CARRIER 600 Carrier signal detected at 600 bits/s (modem-to-modem line speed).
42 CARRIER 600/75 Carrier signal detected at 600 bits/s when transmitting and at 75 when
receiving (modem-to-modem line speed).
43 CARRIER 75/600 Carrier signal detected at 75 bits/when transmitting and at 600 bits/s
when receiving (modem-to-modem line speed).
44 CARRIER 1200/75 Carrier signal detected at 1200 bits/s when transmitting and at 75 when
receiving (modem-to-modem line speed).
45 CARRIER 75/1200 Carrier signal detected at 75 bits/when transmitting and at 1200 bits/s
when receiving (modem-to-modem line speed).
46 CARRIER 1200 Carrier signal detected at 1200 bits/s (modem-to-modem line speed).
47 CARRIER 2400 Carrier signal detected at 2400 bits/s (modem-to-modem line speed).
48 CARRIER 4800 Carrier signal detected at 4800 bits/s (modem-to-modem line speed).
49 CARRIER 7200 Carrier signal detected at 7200 bits/s (modem-to-modem line speed).
50 CARRIER 9600 Carrier signal detected at 9600 bits/s (modem-to-modem line speed).
51 CARRIER 12000 Carrier signal detected at 12000 bits/s (modem-to-modem line speed).
52 CARRIER 14400 Carrier signal detected at 14400 bits/s (modem-to-modem line speed).
53 CARRIER 16800 Carrier signal detected at 16800 bits/s (modem-to-modem line speed).
54 CARRIER 19200 Carrier signal detected at 19200 bits/s (modem-to-modem line speed).
55 CARRIER 28800 Carrier signal detected at 28800 bits/s (modem-to-modem line speed).
56 CARRIER 38400 Carrier signal detected at 38400 bits/s (modem-to-modem line speed).
57 CARRIER 56000 Carrier signal detected at 56000 bits/s (modem-to-modem line speed).
58 CARRIER 57600 Carrier signal detected at 57600 bits/s (modem-to-modem line speed).
59 CARRIER 64000 Carrier signal detected at 64000 bits/s (modem-to-modem line speed).
66 COMPRESSION: Data compression using MNP Class 5 is negotiated for the connection.
CLASS 5
67 COMPRESSION: Data compression using ITU-T V.42bis is negotiated for the connection.
V.42BIS
68 COMPRESSION: Data compression using Hayes Adaptive Data Compression is negotiated for
ADC the connection.
69 COMPRESSION: Data compression was not negotiated for the connection.
NONE
70 PROTOCOL: No protocol was negotiated for the connection. A standard asynchronous
NONE connection was made.
71 PROTOCOL: An error-control connection was negotiated with LAPB protocol.
ERROR- This protocol is the one used by the first V-series products.
CONTROL/ LAPB
72 PROTOCOL: A half-duplex error-control connection was negotiated with LAPB protocol.
ERROR-CONTROL This protocol is used by the first Vseries products communicating at 9600
/ LAPB/HDX bits/s.
73 PROTOCOL: An error-control connection is negotiated using the Hayes Asynchronous
ERROR- Framing Technique (AFT). AFT connects modems such as Smartmodem 1200 that
CONTROL/LAPB/ do not communicate synchronously across the telephone line. AFT enables an
AFT error-control protocol.
74 PROTOCOL: An error-control connection using the X.25 protocol is established with a
X.25/LAPB carrier speed of 1200, 2400, 4800, or 9600 bits/s.
75 PROTOCOL: A half-duplex error-control connection using the X.25 protocol is
X.25/LAPB/HDX established with a carrier speed of 4800 or 9600 bits/s.
76 76 p; PROTOCOL: An asynchronous error-control connection using the X.25 protocol is
X.25/LAPB/AFT established with a carrier speed of 1200 bits/s. The Hayes AFT is used.
77 PROTOCOL: An error-control connection using the V.42 LAPM protocol is established
LAP-M with a carrier speed of 1200, 2400, 4800, or 9600 bits/s.
78 PROTOCOL: A half-duplex error-control connection using the V.42 LAPM protocol is
LAP-M/HDX established with a carrier speed of 4800 or 9600 bits/s.
79 PROTOCOL: An asynchronous error-control connection using the V.42 LAPM protocol is
LAP-M/AFT established with a carrier speed of 1200 bits/s. The Hayes AFT is used.
80 PROTOCOL: An error-control connection using the V.42 LAPM alternative protocol is
ALT established with a carrier speed of 1200, 2400, 4800, or 9600 bits/s. This
protocol is MNP Classes 2, 3, and 4 compatible.
81 PROTOCOL:
ISDN
82 PROTOCOL:
X.25
83 PROTOCOL:
V.120
84 PROTOCOL:
T-LINK
85 PROTOCOL:
DTMF
86 PROTOCOL: FAX connection established.
FAX
91 AUTOSTREAM: Hayes AutoStream Level 1 is negotiated for the connection. This technique
LEVEL 1 allows multiplexing of multiple virtual channels.
92 AUTOSTREAM: Hayes AutoStream Level 2 is negotiated for the connection. This technique
LEVEL 2 provides for multiplexing of multiple virtual channels, with transparent
control of one PAD (non-simultaneous).
93 AUTOSTREAM: Hayes AutoStream Level 3 is negotiated for the connection. This technique
LEVEL 3 allows multiplexing of multiple virtual channels, with transparent control
of all PADs (simultaneous).
94 AUTOSTREAM: Hayes AutoStream Level 4 combines AutoStream types B and B1.
LEVEL 4
95 AUTOSTREAM: Hayes AutoStream Level 4 combines AutoStream types A, B, and B1.
LEVEL 5
98 RESERVED FOR VANS
99 RESERVED FOR VANS
105 CARRIER 115200 Carrier signal detected at 115200 bits/s (modem-to-modem line speed).
106 CARRIER 31200 Carrier signal detected at 31200 bits/s (modem-to-modem line speed).
107 CARRIER 33600 Carrier signal detected at 33600 bits/s (modem-to-modem line speed).
111 DELAYED Must wait to dial because of blacklist.
112 BLACKLISTED Number is blacklisted, reset to clear.
119 MODULATION: The connection established Express MODULATION.
Express
120 MODULATION: The connection established Bell 103 MODULATION.
Bell 103
121 MODULATION: The connection established Bell 212 MODULATION.
Bell 212
122 MODULATION: The connection established V.21 MODULATION.
V.21
123 MODULATION: The connection established V.22 MODULATION.
V.22
124 MODULATION: The connection established V.22bis MODULATION.
V.22bis
125 MODULATION: The connection established V.23 MODULATION.
V.23
126 MODULATION: The connection established V.32 MODULATION.
V.32
127 MODULATION: The connection established V.32bis MODULATION.
V.32bis
128 MODULATION: The connection established V.FC MODULATION.
V.FC
129 MODULATION: The connection established V.34 MODULATION.
V.34
Click here to return to the Contents page.