EXIT - Exit PAD Command State

Command Line Format
N/A

Suffix Values
N/A

Result Codes
N/A

Description
Use the EXIT command to leave the PAD command state and enter the modem AT command state. For example, if you are in the PAD command state (of any virtual channel) and you want to hang up the phone, first type:

EXIT <CR>

The OK result code is sent from the modem to the attached computer.

then type:

ATH0 <CR>

This AT command hangs up the modem, breaking the physical connection to the network; the OK result code is returned if the modem hangs up before the network; if the network hangs up first, the NO CARRIER result code is returned. Hanging up clears all virtual connections still engaged.

Click here to return to the Contents page.