PAR? - Read Parameter Command

Command Line
PAR? [<paramete>] [,<parameter>...]

Suffix Values
<parameter> Number of specific PAD parameter settings to display. If no PAD parameters are specified, displays the settings for all 22 PAD parameters. Enter a zero (0) to display settings for all National PAD parameters.

Result Codes
ERR Invalid command format

<parameter>:INV Invalid parameter entered. e.g., if PAR?40 were typed, PAR 40:INV would be displayed since 40 is out of the range 1-22.

Description
The PAR? command displays the current settings of the local PAD. Settings for selected PAD parameters can be requested or if the command is issued with no parameters, the settings for all twenty-two PAD parameters are requested. A 0:0 indicates that the subsequent settings are National PAD parameters. For example, issuing PAR? 1,4,0,70,71 displays the current settings for the specified parameters (1,4,0,70, 71) of the local PAD: PAR 1:0, 4:0, 0:0, 70:1, 71:0

If no parameters are specified: PAR? the settings for all twenty-two PAD parameters are displayed:
PAR 1:0, 2:0, 3:0, 4:0, 5:0, 6:5, 7:5, 8:0, 9:0, 10:0, 11:14,12:0, 13:0, 14:0, 15:0, 16:8, 17:24, 18:18, 19:1, 20:65, 21:0,22:0

Click here to return to the Contents page.