Parameter 4 - Selection of Idle Timer Delay

In addition to character forwarding, this parameter lets you forward data to the host based on an idle time. If data is in the buffer and no additional characters have been received for the specified period, the buffer contents are sent to the host. Parameter 4 is ignored if National PAD Parameter 70 (streaming data forwarding) is set to 1, or if parameter 15 is set to 1.

Parameter 4 supports the following values:

Values         Description                                        

0              No data forwarding on time-out                     

1 - 255        Data forwarding on time-out of &ltvalue>        

               multiplied by 50 ms.                                

50             50 ms. time-out (factory setting)

Click here to return to the Contents page.