Parameter 11 - Terminal Speed

This parameter reflects the current speed of the DTE. It is automatically set by the PAD using the last AT command and may not be updated by the user or remote system (read only).

Parameter 11 is read-only with no factory setting, and supports the following bit values:

Value  Bit Rate                   

0      110 bits/s                 

2      300 bits/s                 

3      1200 bits/s                

4      600 bits/s                 

5      75 bits/s                  

12     2400 bits/s                

13     4800 bits/s                

14     7200 or 9600 bits/s        

15     14400 or 19200 bits/s      

16     38400 bits/s

Click here to return to the Contents page.