#CID - Enable Caller ID Detection and Select Reporting Format

This command selects or disables Caller ID recognition and reporting in any mode.

Parameters:
n = 0, 1, or 2

Default:
0

Result Codes:
OK - n = 0, 1, or 2

ERROR - Otherwise

Command Options:
#CID? - Returns the current setting (0, 1, or 2) of the #CID command as an ASCII decimal value in result code format.

#CID? - Returns the message: 0, 1, 2

#CID=0 - Disables Caller ID

#CID=1 - Enables formatted Caller ID reporting of ICLID SDM (Single Data Message) and MDM (Multiple Data Message) packets.

#CID=2 - Enables unformatted Caller ID reporting of any ICLID packet received after the first RING cycle including SDM, MDM, or call waiting packets.

Click here to return to the Contents page.