#VSD - Enable Silence Deletion (Voice Receive)

This command is used to enable or disable Voice Receive Mode silence deletion.

Parameters:
n = 0 or 1

Default:
0 or 1

Result Codes:
CONNECT - When voice transfer from modem to DTE can begin.

ERROR - If #VLS=0 and not connected to any input device.

Command Options:
#VSD? - Returns the current setting of the #VSD command as an ASCII decimal value in result code format.

#VSD=? - Returns the message: 1.

#VSD=0 - Turns off the silence deletion.

#VSD=1 - Turns on the silence deletion if the silence sensitivity setting #VSS is non zero. The aggressiveness of the silence deletion is controlled by #VSS.

Click here to return to the Contents page.