Modem Re-configuration
When a call is completed, a clean-up command should be issued
to return the modem to a known configuration. For example, if verbose result
codes are selected when the modem is reset, and the controller selected
numeric result codes, upon completing the session, the controller should
reset the modem to re-select verbose result codes. If the linefeed character
is changed to suit the software or environment, the character should be
set to its former value. Any other command options that were modified, should
be restored to their factory-set values.
The controller should issue a Zn - Perform Soft Reset
command option to ensure the modem is restored to its power-up state.
Click here to return to the Contents page.