Terminating a Test in Progress - &T0
A test may be terminated from the command state at any time by issuing
the &T0 command to the modem. If the local analog loopback or remote digital
loopback tests are being performed, it is necessary to issue the escape
sequence to return to the command state before sending the &T0 command.
Commands that follow &T0 in a command line are ignored.
Step 1:
Enter the H0 command to stop a test, leaving the value of S18 at its
current value; and reset with the Z command to stop the test, resetting
the value of S18 to 0.
A soft reset with the Z command re-configures the modem with the selected
user profile. Both techniques break the connection.
Click here to return to the Contents page.