mysqld can issue error messages in the following languages: Czech,
Dutch, English (the default), Estonia, French, German, Hungarian, Italian,
Norwegian, Norwegian-ny, Polish, Portuguese, Spanish and Swedish.
To start mysqld with a particular language, use either the
--language=lang or -L lang options. For example:
shell> mysqld --language=swedish
or:
shell> mysqld --language=/usr/local/share/swedish
Note that all language names are specified in lowercase.
The language files are located (by default) in `mysql_base_dir/share/LANGUAGE/'.
To update the error message file, you should edit the `errmsg.txt' file and execute the following command to generate the `errmsg.sys' file:
shell> comp_err errmsg.txt errmsg.sys
If you upgrade to a newer version of MySQL, remember to repeat your changes with the new `errmsg.txt' file.
By default, MySQL uses the ISO-8859-1 (Latin1) character set. This is the character set used in the USA and western Europe.
The character set determines what characters are allowed in names and how
things are sorted by the ORDER BY and GROUP BY clauses of
the SELECT statement.
You can change the character set with the
--default-character-set option when you start the server.
The character sets available depend on the --with-charset=charset
option to configure, and the character set configuration files
listed in `SHAREDIR/charsets/Index'.
See section 4.7.1 Quick installation overview.
When a client connects to a MySQL server, the server sends the default character set in use to the client. The client will switch to use this character set for this connection.
One should use mysql_real_escape_string() when escaping strings
for a SQL query. mysql_real_escape_string() is identical to the
old mysql_escape_string() function, except that it takes the MYSQL
connection handle as the first parameter.
If the client is compiled with different paths than where the server is installed and the user that configured MySQL didn't included all character sets in the MySQL binary one must specify for the client where it can find the additional character sets it will need if the server runs with a different character set than the client.
On can specify this by putting in a MySQL option file:
[client] default-set-dir=/usr/local/mysql/share/mysql/charsets
where the path points to where the dynamic MySQL character sets are stored.
One can force the client to use specific character set by specifying:
[client] default-character-set=character-set-name
but normally this is never needed.
To add another character set to MySQL, use the following procedure:
MYSET below.
CHARSETS_AVAILABLE and
COMPILED_CHARSETS lists in configure.in.
MYNUMBER below.
ctype_MYSET, to_lower_MYSET and so on.
Near the top of the file, place a special comment like this:
/* * This comment is parsed by configure to create ctype.c, * so don't change it unless you know what you are doing. * * .configure. number_MYSET=MYNUMBER * .configure. strxfrm_multiply_MYSET=N * .configure. mbmaxlen_MYSET=N */The
configure program uses this comment to include
the character set into the MySQL library automatically.
The strxfrm_multiply and mbmaxlen lines will be explained in
the following sections. Only include them if you the string
collating functions or the multi-byte character set functions,
respectively.
to_lower[] and to_upper[] are simple arrays that hold the
lowercase and uppercase characters corresponding to each member of the
character set. For example:
to_lower['A'] should contain 'a' to_upper['a'] should contain 'A'
sort_order[] is a map indicating how characters should be ordered for
comparison and sorting purposes. For many character sets, this is the same as
to_upper[] (which means sorting will be case insensitive).
MySQL will sort characters based on the value of
sort_order[character]. For more complicated sorting rules, see
the discussion of string collating below.
ctype[] is an array of bit values, with one element for one character.
(Note that to_lower[], to_upper[] and sort_order[]
are indexed by character value, but ctype[] is indexed by character
value + 1. This is an old legacy to be able to handle EOF.)
You can find the following bitmask definitions in `m_ctype.h':
#define _U 01 /* Upper case */ #define _L 02 /* Lower case */ #define _N 04 /* Numeral (digit) */ #define _S 010 /* Spacing character */ #define _P 020 /* Punctuation */ #define _C 040 /* Control character */ #define _B 0100 /* Blank */ #define _X 0200 /* heXadecimal digit */The
ctype[] entry for each character should be the union of the
applicable bitmask values that describe the character.
For example, 'A' is an uppercase character (_U) as well as a
hexadecimal digit (_X), so ctype['A'+1] should contain the value:
_U + _X = 01 + 0200 = 0201
CHARSETS_AVAILABLE and
COMPILED_CHARSETS lists in configure.in.
If the sorting rules for your language are too complex to be handled
with the simple sort_order[] table, you need to use the string
collating functions.
Right now the best documentation on this is the character sets that are already implemented. Look at the big5, czech, gbk, sjis and tis160 character sets for examples.
You must specify the strxfrm_multiply_MYSET=N value in the
special comment at the top of the file. N should be set to
the maximum ratio the strings may grow during my_strxfrm_MYSET (it
must be a positive integer).
If your character set includes multi-byte characters, you need to use the multi-byte character functions.
Right now the best documentation on this is the character sets that are already implemented. Look at the euc_kr, gb2312, gbk, sjis and ujis character sets for examples.
You must specify the mbmaxlen_MYSET=N value in the
special comment at the top of the file. N should be set to
the size in bytes of the largest character in the set.
MySQL 3.22 has a 4G limit on table size. With the new
MyISAM in MySQL 3.23 the maximum table size is pushed up
to 8 million terabytes (2 ^ 63 bytes).
Note however that operating systems have their own file size limits. Here are some examples:
| Linux-Intel | 2G (or 4G with reiserfs) |
| Linux-Alpha | 8T (?) |
| Solaris 2.5.1 | 2G (possible 4G with patch) |
| Solaris 2.6 | 4G |
| Solaris 2.7 Intel | 4G |
| Solaris 2.7 ULTRA-SPARC | 8T (?) |
This means that the table size for MySQL is normally limited by the operating system.
By default, MySQL tables have a maximum size of about 4G. You can
check the maximum table size for a table with the SHOW TABLE STATUS
command or with the myisamchk -dv table_name.
See section 7.23 SHOW syntax (Get information about tables, columns,...).
If you need bigger tables than 4G (and your operating system supports
this), you should set the AVG_ROW_LENGTH and MAX_ROWS
parameter when you create your table. See section 7.7 CREATE TABLE syntax. You can
also set these later with ALTER TABLE. See section 7.8 ALTER TABLE syntax.
If you need to have bigger tables than 2G / 4G
If your big table is going to be read-only, you could use
myisampack to merge and compress many tables to one.
myisampack usually compresses a table by at least 50%, so you can
have, in effect, much bigger tables. See section 14.7 The MySQL compressed read-only table generator..
Another solution can be the included MERGE library, which allows you to handle a collection of identical tables as one. (Identical in this case means that all tables are created with identical column information.) Currently MERGE can only be used to scan a collection of tables because it doesn't support indexes. We will add indexes to this in the near future.
Go to the first, previous, next, last section, table of contents.