Sn= - Write To An S-register

Command Line Format
AT [cmds] [ S [ <S-register Address>]] = ;[cmds] ;

Address Values
Refer to S -Registers

Data Values
Refer to S -Registers

Default
S0

Stored by &Wn
no

Displayed by &V
N/A

Description
The command is issued as Sn=x. The value of x is written to the S-register specified by n, overriding the previous value.

If no n suffix is present, the address 0 is used.

If no x value is present, the value 0 is written.

Example:

ATS=X<CR>means S0=X

AT=X<CR>means Sn=X, where n is the suffix of the last named S-register.

Execution Time 5 ms maximum

Cross Reference
Commands - Sn= - Write To An S-register , Sn?

LEDs - AA, HS, TR

Click here to return to the Contents page.