Vn - Select Result Code Format Option

Command Line Format
AT [cmds] V [suffix] [cmds] <CR>

Suffix Values
0 and 1

Default
V1

Stored by &Wn
yes

Displayed by &V
yes

Description
The Vn command determines which result code format to use (i.e., verbose versus numeric) for info-text and result codes. Refer to the table below. Note that <CR>and <LF>are defined by S-registers S3 and S4, respectively.

V0 - Result codes displayed in numeric form.

V1 - Result codes displayed in verbose (word) form.

The following table shows the formats. See also the Q command.

Note: The text of the info-text in the table below may consist of multiple lines of text. The formats depicted here only refer to <CR><LF>characters between info-texts and not within them.

Response type     V0                V1                                                    
Info-text         text              <CR><LF>                                     

                  <CR><LF> text                                                  

                                    <CR><LF>                                     

Result codes      numeric code      <CR>>LF>                                     

                  <CR>         verbose code                                          

                                    <CR><LF>

Result Code
Info-text Formats

Execution Time
1 ms maximum

Cross Reference
Info-text

Result Codes

Execution Time

Click here to return to the Contents page.