S Register (Selection List)
Click on any S register from the following list:
S0 - Ring After Which to Answer
S1 - Ring Count
S2 - Hayes Escape Character
S3 - Carriage Return Character
S4 - Line Feed Character
S5 - Backspace Character
S6 - Wait Before Blind Dialing
S7 - Wait for Carrier
S8 - Pause Time for Comma
S9 - Carrier Recovery Time Delay
S10 - Lost Carrier Hang Up
S11 - DTMF Dialing Speed
S12 - Hayes Escape Guard Time
S16 - Test in Progress
S18 - Modem Test Timer
S25 - Detect DTR Change
S26 - RTS to CTS Delay Interval
S30 - Inactivity Timeout
S31 - XON Character
S32 - XOFF Character
S36 - Negotiation Failure Treatment
S37 - Desired DCE Line Speed
S38 - Hang-up Timeout
S39 - Current Flow Control Setting
S43 - Current Line Speed
S44 - Framing Technique
S46 - Protocol/Compression Selection
S48 - Feature Negotiation Action
S49 - Buffer Low Limit
S50 - Buffer High Limit
S53 - Global PAD Configuration
S55 - AutoStream Protocol Request
S56 - AutoStream Protocol Status
S57 - Network Options Register
S59 - Leased Line Failure Alarm
S60 - Leased Line Failure Action
S61 - Leased Line Retry Number
S62 - Leased Line Restoral Options
S63 - Leased Line Transmit Level
S64 - Leased Line Receive Level
S69 - Link Layer k Protocol
S70 - Maximum Number of Retransmissions
S71 - Link Layer Timeout
S72 - Loss of Flag Idle Timeout
S73 - No Activity Timeout
S74 & S75 - Minimum Incoming LCN
S76 & S77 - Maximum Incoming LCN
S78 & S79 - Outgoing LCN
S80 - X.25 Packet Level N20 Parameter
S81 - X.25 Packet Level T20 Parameter
S82 - Break Selection
S84 - ASU Negotiation
S85 - ASU Negotiation Status
S86 - Connection Failure Cause Code
S87 - Fixed Speed DTE Interface
S91 - Select Dial-up Line Transmit Level
S92 - MI/MIC Options
S93 - V.25bis Asynchronous Interface Speed
S94 - V.25bis Mode Control
S95 - Extended Result Code Bit Map
S97 - V.32 Late Connecting Handshake Timing
S101 - Distinctive Ring Reporting
S105 - Frame Size
S108 - Signal Quality Selector
S109 - Carrier Speed Selector
S110 - V.32/V.32bis Selector
S113 - Calling Tone Control
S116 - Connection Timeout
S121 - Use of DTR
S122 - V.13 Selection
S141 - Detection Phase Timer
S142 - Online Character Format
S143 - KDS Handshake Mode
S144 - Autobaud Speed Group Selection
S150 - V.42 Options
S151 - Simultaneous Voice Data Control
S154 - Force Port Speed
S157 - Timeout Result Code
Click here to return to the Contents page.